Diberdayakan oleh Blogger.

How to Flash / Install Firmware Samsung GALAXY TAB PRO 12.2 3G Using ODIN v3.11.1

How to Flash / Install Firmware Samsung GALAXY TAB PRO 12.2 3G Using ODIN v3.11.1

Flash Stock Firmware Samsung GALAXY TAB PRO 12.2 3G. This device Also known as Samsung T900. This guide below will show you how to flash Samsung GALAXY TAB PRO 12.2 3G, You can use this method to fix a bootloop or bricked your device, or you can use this method to upgrade your device to the latest software version. We recommend using Samsung’s own utilities, Samsung Kies and OTA (Over-the-air) to upgrade your software. Use this guide if you are 1000% sure about the risks involved in flashing your device. guidebelajar is not responsible for any damage caused by following this guide.

This device is released on 2014, January. Samsung GALAXY TAB PRO 12.2 3G is the smartphone with 12.2 Inchi Super clear LCD capacitive touchscreen, 16M colors, work on Android OS, v4.4 (KitKat), with Octa-core (4x1.9 GHz Cortex-A15 & 4x1.3 GHz Cortex-A7) CPU, Exynos 5420 Octa chipset, Mali-T628 MP6 GPU, combined with 3 GB of RAM and 8 MP of  Main camera and 2 MP on secondary camera. 

Preparation.

Below is the following things you must do before flashing your Android Samsung Smartphone device.
  1. Make sure your Samsung GALAXY TAB PRO 12.2 3G is fully charged. or minimum has 80 % of battery capacity. It will avoid the flashing process failure.
  2. Flashing process will delete or wipe all data stored in internal memory. So, don't forget to backup all data before flashing device.
  3. Make sure you have installed a latest of the Samsung driver, that support with your device, If you don't have, you can download here
  4. Original USB cable driver for your Samsung GALAXY TAB PRO 12.2 3G.
  5. Download Odin V3.11.1, Here
  6. Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit the other site, Here. or you can read Guide How to Download Official Samsung Firmware From SamMobile. Here
  7. Firmware Samsung GALAXY TAB PRO 12.2 3G (Direct Link) you must Log In to download firmware via this link.

Guide To Flash Samsung GALAXY TAB PRO 12.2 3G 

  1. You must download all necessary file.(Samsung USB driver and Odin)
  2. Then, install all driver to your computer or PC.
  3. Extraxt Odin V3.11.1. file on the destination folder.
  4. Switch Off your Samsung GALAXY TAB PRO 12.2 3G to start flashing process.
  5. Then, run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.
    Flash Stock Firmware On Samsung GALAXY TAB PRO 12.2 3G
    Flash Stock Firmware On Samsung GALAXY TAB PRO 12.2 3G
  6. When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file. 
    Flash Stock Firmware On Samsung GALAXY TAB PRO 12.2 3G
    Flash Stock Firmware On Samsung GALAXY TAB PRO 12.2 3G
  7. Now your firmware file has been inserted in Odin3 
    Flash Stock Firmware On Samsung GALAXY TAB PRO 12.2 3G
    Flash Stock Firmware On Samsung GALAXY TAB PRO 12.2 3G
  8. Then, Enter download mode your Samsung GALAXY TAB PRO 12.2 3G. See this guide how to do it.
  9. On this mode, now connect your Samsung GALAXY TAB PRO 12.2 3G to your PC / laptop using a USB cable. 
  10. After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)
    Enter download mode samsung GALAXY TAB PRO 12.2 3G
    Port Com Samsung GALAXY TAB PRO 12.2 3G
  11. Make sure re-partition is NOT ticked
  12. When everything already you can click Start Button. at the bottom left corner
  13. Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process. 
  14. When complete it will display a notification PASS and your smartphone Samsung GALAXY TAB PRO 12.2 3G will automatically restart.
  15. Wait your device to boot up, it will take a while.
  16. When your Samsung GALAXY TAB PRO 12.2 3G is ready to use, now check your firmware version. See this guide how to check it.
  17. Finish.


  18. Warning.
    Never disconnect the USB cable while flashing process is running.
    Install Samsung Mobile Driver or Samsung Smart Switch if you don't see a sign in Odin.
    Flash your Samsung GALAXY TAB PRO 12.2 3G device at your own risk.
    Flashing firmware which contains more than one *.tar.md5 file will wipe all data on internal storage.  Flashing official/stock firmware won't increase the binary flash nor KNOX WARRANTY VOID counter and won't cancel the Samsung GALAXY TAB PRO 12.2 3G device's warranty. 
Bagikan :
+
Previous
Next Post »
0 Komentar untuk "How to Flash / Install Firmware Samsung GALAXY TAB PRO 12.2 3G Using ODIN v3.11.1"

Entri Populer

 
Template By Kunci Dunia
Back To Top