Guide to Flash / Install Firmware Samsung GALAXY STAR TRIOS S5283 Using ODIN v3.11.1
Flash Stock Firmware Samsung GALAXY STAR TRIOS S5283. This guide below show you a simple method to flash or install a new firmware on Samsung GALAXY STAR TRIOS S5283 Using ODIN v3.11.1. Using this method to upgrade your device will find too many risks. So, We recommend using Samsung’s own utilities, Samsung Kies and OTA (Over-the-air) to upgrade your software. Use this guide if you are 99% sure about the risks involved in flashing your device. guidebelajar is not responsible for any damage caused by following this guide.
This device is released on 2014, February. Samsung GALAXY STAR TRIOS S5283 is the smartphone with 3,14 Inchi TFT capacitive touchscreen, 256K colors, work on Android OS, v4.1.2 (Jelly Bean), Supported with 1.0 GHz Cortex-A5 CPU, Qualcomm MSM7225A Snapdragon S1 chipset, Adreno 200 GPU, combined with 512 MB of RAM and 2 MP of Main camera and no secondary camera.
This device is released on 2014, February. Samsung GALAXY STAR TRIOS S5283 is the smartphone with 3,14 Inchi TFT capacitive touchscreen, 256K colors, work on Android OS, v4.1.2 (Jelly Bean), Supported with 1.0 GHz Cortex-A5 CPU, Qualcomm MSM7225A Snapdragon S1 chipset, Adreno 200 GPU, combined with 512 MB of RAM and 2 MP of Main camera and no secondary camera.
Preparation.
Below is the following things you must do before flashing your Android Samsung Smartphone device.
- Make sure your Samsung GALAXY STAR TRIOS S5283 is fully charged. or minimum has 80 % of battery capacity. It will avoid the flashing process failure.
- Flashing process will delete or wipe all data stored in internal memory. So, don't forget to backup all data before flashing device.
- Make sure you have installed a latest of the Samsung driver, that support with your device, If you don't have, you can download here
- Original USB cable driver for your Samsung GALAXY STAR TRIOS S5283.
- Download Odin V3.11.1, Here
- Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit the other site, Here.
- Or you can read Guide How to Download Official Samsung Firmware From SamMobile. Here
- Firmware Samsung GALAXY STAR TRIOS S5283B (Direct Link) you must Log In to download firmware via this link.
Guide To Flash Samsung GALAXY STAR TRIOS S5283
- You must download all necessary file.(Samsung USB driver and Odin)
- Then, install all driver to your computer or PC.
- Extraxt Odin V3.11.1. file on the destination folder.
- Switch Off your Samsung GALAXY STAR TRIOS S5283 to start flashing process.
- Then, run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.
Flash Stock Firmware On Samsung GALAXY STAR TRIOS S5283 - When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file.
Flash Stock Firmware On Samsung GALAXY STAR TRIOS S5283 - Now your firmware file has been inserted in Odin3
Flash Stock Firmware On Samsung GALAXY STAR TRIOS S5283 - Then, Enter download mode your Samsung GALAXY STAR TRIOS S5283. See this guide how to do it.
- On this mode, now connect your Samsung GALAXY STAR TRIOS S5283 to your PC / laptop using a USB cable.
- After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)
Port Com Samsung GALAXY STAR TRIOS S5283 - Make sure re-partition is NOT ticked
- When everything already you can click Start Button. at the bottom left corner
- Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process.
- When complete it will display a notification PASS and your smartphone Samsung GALAXY STAR TRIOS S5283 will automatically restart.
- Wait your device to boot up, it will take a while.
- When your Samsung GALAXY STAR TRIOS S5283 is ready to use, now check your firmware version. See this guide how to check it.
- Finish.
Warning.
Never disconnect the USB cable while flashing process is running.
Install Samsung Mobile Driver or Samsung Smart Switch if you don't see a sign in Odin.
Flash your Samsung GALAXY STAR TRIOS S5283 device at your own risk.
Flashing firmware which contains more than one *.tar.md5 file will wipe all data on internal storage. Flashing official/stock firmware won't increase the binary flash nor KNOX WARRANTY VOID counter and won't cancel the Samsung GALAXY STAR TRIOS S5283 device's warranty.
0 Komentar untuk "Guide to Flash / Install Firmware Samsung GALAXY STAR TRIOS S5283 Using ODIN v3.11.1"